From: John Jones (acer0001@gmail.com)
Date: Mon Feb 25 2008 - 04:04:06 ARST
If I am not mistaken, you need keepalives to the FR switch. So, remove the
"no keepalive" statement and see if the interface comes up. You would need
to disable keepalives for back-to-back FR, though.
John
On Sun, Feb 24, 2008 at 12:02 AM, <kevin.m.dalby@accenture.com> wrote:
> Hi All,
>
>
>
> Just added a frame relay switch to my lab, and can't get frame working on
> one of the interfaces/works fine on others(also tried moving to dif slots on
> the FRSW, used dif cables and with dif routers, still doesn't work)
>
>
>
> All suggestions appreciated. Thanks!
>
>
>
>
>
> R6 <-FRSW-> BB1
>
>
>
> Rack1R6#sh ip int brie
>
> Interface IP-Address OK? Method Status
> Protocol
>
> Ethernet0/0 140.1.100.6 YES manual up
> up
>
> Ethernet1/0 unassigned YES unset administratively
> down down
>
> Serial3/0 unassigned YES manual down
> down
>
> Serial3/0.1 54.1.2.6 YES manual down
> down
>
>
>
> Rack1R6# sh run
>
>
>
> interface Serial3/0
>
> no ip address
>
> encapsulation frame-relay
>
> no keepalive
>
> no fair-queue
>
> !
>
> interface Serial3/0.1 point-to-point
>
> ip address 54.1.2.6 255.255.255.0
>
> frame-relay interface-dlci 100
>
> !
>
>
>
> Rack1R6#sh frame pvc
>
>
>
> PVC Statistics for interface Serial3/0 (Frame Relay DTE)
>
>
>
> Active Inactive Deleted Static
>
> Local 0 0 0 1
>
> Switched 0 0 0 0
>
> Unused 0 0 0 0
>
>
>
> DLCI = 100, DLCI USAGE = LOCAL, PVC STATUS = STATIC, INTERFACE =
> Serial3/0.1
>
>
>
> input pkts 0 output pkts 0 in bytes 0
>
> out bytes 0 dropped pkts 0 in pkts dropped 0
>
> out pkts dropped 0 out bytes dropped 0
>
> in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
>
> out BECN pkts 0 in DE pkts 0 out DE pkts 0
>
> out bcast pkts 0 out bcast bytes 0
>
> 5 minute input rate 0 bits/sec, 0 packets/sec
>
> 5 minute output rate 0 bits/sec, 0 packets/sec
>
> pvc create time 04:08:43, last time pvc status changed 03:30:45
>
>
>
>
>
> Rack1R6#sh frame map
>
> Serial3/0.1 (down): point-to-point dlci, dlci 100(0x64,0x1840), broadcast
>
>
>
>
>
>
>
>
>
> BB1#sh ip int brie
>
> Interface IP-Address OK? Method Status
> Protocol
>
> Serial0/0.100 54.1.2.254 YES NVRAM down
> down
>
>
>
> BB1#sh run int s0/0.100
>
>
>
> interface Serial0/0.100 point-to-point
>
> description PVC 100 to Rack8
>
> ip address 54.1.2.254 255.255.255.0
>
> ipv6 address 2001:54:1:2::254/64
>
> ipv6 address FE80::254 link-local
>
> frame-relay interface-dlci 100
>
>
>
> BB1#sh frame pvc
>
>
>
> PVC Statistics for interface Serial0/0 (Frame Relay DTE)
>
>
>
> Active Inactive Deleted Static
>
> Local 0 6 0 0
>
> Switched 0 0 0 0
>
> Unused 0 0 0 0
>
>
>
> DLCI = 100, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE =
> Serial0/0.100
>
>
>
> input pkts 0 output pkts 1037 in bytes 0
>
> out bytes 96114 dropped pkts 0 in pkts dropped 0
>
> out pkts dropped 0 out bytes dropped 0
>
> in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
>
> out BECN pkts 0 in DE pkts 0 out DE pkts 0
>
> out bcast pkts 940 out bcast bytes 90416
>
> 5 minute input rate 0 bits/sec, 0 packets/sec
>
> 5 minute output rate 0 bits/sec, 0 packets/sec
>
> pvc create time 4d06h, last time pvc status changed 00:40:57
>
>
>
> BB1#sh frame map
>
> Serial0/0.100 (down): point-to-point dlci, dlci 100(0x64,0x1840),
> broadcast
>
> status defined, inactive
>
>
>
>
>
>
>
>
>
> FRSW# sh run
>
>
>
> interface Serial6
>
> description Connected to Rack1R6
>
> no ip address
>
> encapsulation frame-relay
>
> clockrate 64000
>
> frame-relay intf-type dce
>
> frame-relay route 51 interface Serial9 51
>
> frame-relay route 100 interface Serial9 100
>
> frame-relay route 101 interface Serial9 101
>
> frame-relay route 201 interface Serial9 201
>
> frame-relay route 301 interface Serial9 301
>
> frame-relay route 401 interface Serial9 401
>
> !
>
> interface Serial7
>
> no ip address
>
> shutdown
>
> !
>
> interface Serial8
>
> no ip address
>
> shutdown
>
> !
>
> interface Serial9
>
> description Connected to BB1
>
> no ip address
>
> encapsulation frame-relay
>
> clockrate 64000
>
> frame-relay intf-type dce
>
> frame-relay route 51 interface Serial6 51
>
> frame-relay route 100 interface Serial6 100
>
> frame-relay route 101 interface Serial6 101
>
> frame-relay route 201 interface Serial6 201
>
> frame-relay route 301 interface Serial6 301
>
> frame-relay route 401 interface Serial6 401
>
>
>
>
>
> fra# sh ip int brie
>
> Interface IP-Address OK? Method Status
> Protocol
>
> Serial4 unassigned YES unset up
> up
>
> Serial5 unassigned YES unset up
> up
>
> Serial6 unassigned YES unset down
> down
>
> Serial7 unassigned YES manual administratively
> down down
>
> Serial8 unassigned YES manual administratively
> down down
>
> Serial9 unassigned YES unset up
> up
>
>
>
>
>
> PVC Statistics for interface Serial6 (Frame Relay DCE)
>
>
>
> Active Inactive Deleted Static
>
> Local 0 0 0 0
>
> Switched 0 6 0 0
>
> Unused 0 0 0 0
>
>
>
>
>
> DLCI = 100, DLCI USAGE = SWITCHED, PVC STATUS = INACTIVE, INTERFACE =
> Serial6
>
>
>
> input pkts 0 output pkts 0 in bytes 0
>
> out bytes 0 dropped pkts 0 in pkts dropped 0
>
> out pkts dropped 0 out bytes dropped 0
>
> in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
>
> out BECN pkts 0 in DE pkts 0 out DE pkts 0
>
> out bcast pkts 0 out bcast bytes 0
>
> switched pkts 0
>
> Detailed packet drop counters:
>
> no out intf 0 out intf down 0 no out PVC 0
>
> in PVC down 0 out PVC down 0 pkt too big 0
>
> shaping Q full 0 pkt above DE 0 policing drop 0
>
> pvc create time 00:49:40, last time pvc status changed 00:43:39
>
>
>
>
>
> PVC Statistics for interface Serial9 (Frame Relay DCE)
>
>
>
> Active Inactive Deleted Static
>
> Local 0 0 0 0
>
> Switched 0 6 0 0
>
> Unused 0 0 0 0
>
>
>
>
>
> DLCI = 100, DLCI USAGE = SWITCHED, PVC STATUS = INACTIVE, INTERFACE =
> Serial9
>
>
>
> input pkts 14 output pkts 0 in bytes 1446
>
> out bytes 0 dropped pkts 0 in pkts dropped 0
>
> out pkts dropped 0 out bytes dropped 0
>
> in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
>
> out BECN pkts 0 in DE pkts 0 out DE pkts 0
>
> out bcast pkts 0 out bcast bytes 0
>
> switched pkts 0
>
> Detailed packet drop counters:
>
> no out intf 0 out intf down 0 no out PVC 0
>
> in PVC down 0 out PVC down 0 pkt too big 0
>
> shaping Q full 0 pkt above DE 0 policing drop 0
>
> pvc create time 00:49:32, last time pvc status changed 00:43:42
>
>
>
>
>
> This message is for the designated recipient only and may contain
> privileged, proprietary, or otherwise private information. If you have
> received it in error, please notify the sender immediately and delete the
> original. Any other use of the email by you is prohibited.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:49 ARST