From: Moses Polalysa (mpurple7@yahoo.com)
Date: Thu Feb 21 2008 - 03:59:48 ARST
Dear expert,
Sorry for this OOT. I have problem in redundant Firewall Switch Module in my 2 Catalyst 6509. When I switch off the core switch 1 should be the core switch 2 ack as FWSM primary and after the normal condition (both core switch on) should the core switch 1 ack as FWSM primary again (like preempt in HSRP).
But, the process of preempt not run well because the FWSM in core switch 1 (module 5) going down first/off about 1-2 minute(s) then go up again and all the routing is up. My question is this condition in normal? Please advice.
Here is the log about the process I mention above.
CoreSwitch_1#
00:06:13: SP: The PC in slot 5 is shutting down. Please wait ...
00:06:13: SP: PC shutdown completed for module 5
CoreSwitch_1#
00:06:13: %C6KPWR-SP-4-DISABLED: power to module in slot 5 set off (Reset)
CoreSwitch_1#
...
...
...
CoreSwitch_1#
00:08:01: %DIAG-SP-6-RUN_COMPLETE: Module 5: Running Complete Online Diagnostics...
CoreSwitch_1#
00:08:04: %DIAG-SP-6-DIAG_OK: Module 5: Passed Online Diagnostics
00:08:04: %OIR-SP-6-INSCARD: Card inserted in slot 5, interfaces are now online
CoreSwitch_1#
Note: I am using FWSM Hardware: WS-SVC-FWM-1 and FWSM Firewall Version 1.1(3)
Thank you in advance.
Regards,
Moses
____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:49 ARST