From: nhatphuc (nhatphuc@gmail.com)
Date: Fri Feb 15 2008 - 15:32:43 ARST
Hi Group,
My scenario is the same as one in this link:
http://www.groupstudy.com/archives/ccielab/200312/msg01239.html
But it doesn't work. RouterNAT doesn't policy routing
|--------G0/0--RouterNAT
PC1----|
|---------Gateway -----(Internet)
interface Loopback0
ip address 150.1.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface GigabitEthernet0/0
description TO LAN
ip address 192.168.4.1 255.255.255.0 secondary
ip address 192.168.3.6 255.255.255.0
ip nat outside
ip virtual-reassembly
ip policy route-map PBR
duplex auto
speed auto
route-map PBR permit 10
match ip address NET4
set interface Loopback0
!
route-map PBR deny 20
ip access-list standard NET4
permit 192.168.4.0 0.0.0.255
ip nat pool GLOBAL 192.168.3.30 192.168.3.40 prefix-length 24
ip nat inside source list NET4 pool GLOBAL overload
Router#u all
Feb 16 00:19:16 : IP: s=192.168.4.5 (GigabitEthernet0/0), d=192.168.3.20,
len 60, FIB policy match
Feb 16 00:19:16 : IP: s=192.168.4.5 (GigabitEthernet0/0), d=192.168.3.20,
len 60, policy match
Feb 16 00:19:16 : IP: route map PBR, item 10, permit
Feb 16 00:19:16 : IP: s=192.168.4.5 (GigabitEthernet0/0),
d=192.168.3.20(GigabitEthernet0/0), len 60, policy rejected -- normal
forwarding
Router#u all
Feb 16 00:19:21 : IP: s=192.168.4.5 (GigabitEthernet0/0), d=192.168.3.20,
len 60, FIB policy match
Feb 16 00:19:21 : IP: s=192.168.4.5 (GigabitEthernet0/0), d=192.168.3.20,
len 60, policy match
Feb 16 00:19:21 : IP: route map PBR, item 10, permit
Feb 16 00:19:21 : IP: s=192.168.4.5 (GigabitEthernet0/0),
d=192.168.3.20(GigabitEthernet0/0), len 60, policy rejected -- normal
forwarding
Anyone has successfully configured this scenario? How do I make it work?
Thanks
Phuc
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:48 ARST