AW: shape average

From: Fernando Carvalho (fernando.cagica@t-online.de)
Date: Thu Feb 14 2008 - 05:32:12 ARST


Hi,

The second figure is the Bc. If you need you can use this value to define
your Tc (Tc=Bc/CIR....all values in bit/s)
If you want to meet voice requirements consider Tc=10ms.
See my example (policy-map test is applied to fastethernet 0/0):

###########To meet voice requirements##################
!
!
policy-map test
  class test
   shape average 300000 3000
!
!
....
....
          
R_3745#sh policy-map interface fast 0/0
 FastEthernet0/0

  Service-policy output: test

    Class-map: test (match-all)
      0 packets, 0 bytes
      5 minute offered rate 0 bps, drop rate 0 bps
      Match: access-group 10
      Traffic Shaping
           Target/Average Byte Sustain Excess Interval Increment
             Rate Limit bits/int bits/int (ms) (bytes)
           300000/300000 750 3000 3000 10 375

        Adapt Queue Packets Bytes Packets Bytes Shaping
        Active Depth Delayed Delayed Active
        - 0 0 0 0 0 no

    Class-map: class-default (match-any)
      45 packets, 2700 bytes
      5 minute offered rate 0 bps, drop rate 0 bps
      Match: any
R_3745#

#####Now with different values######################

!
class-map match-all test
  match access-group 10
!
!
policy-map test
  class test
   shape average 300000 10000
!
...
...
          
R_3745#sh policy-map interface fast 0/0
 FastEthernet0/0

  Service-policy output: test

    Class-map: test (match-all)
      0 packets, 0 bytes
      5 minute offered rate 0 bps, drop rate 0 bps
      Match: access-group 10
      Traffic Shaping
           Target/Average Byte Sustain Excess Interval Increment
             Rate Limit bits/int bits/int (ms) (bytes)
           300000/300000 2500 10000 10000 33 1250

        Adapt Queue Packets Bytes Packets Bytes Shaping
        Active Depth Delayed Delayed Active
        - 0 0 0 0 0 no

    Class-map: class-default (match-any)
      74 packets, 4440 bytes
      5 minute offered rate 0 bps, drop rate 0 bps
      Match: any
R_3745#

You see the diference on Tc?

HTH

-----Urspr|ngliche Nachricht-----
Von: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Im Auftrag von
Radioactive Frog
Gesendet: Donnerstag, 14. Februar 2008 00:29
An: ccie forum
Betreff: shape average

Can someone explain how to calculate second figure (1000) in the shape
average?

policy-map voice_traffic
 class dscp46
  shape average 30000 10000

thanks
frog



This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:48 ARST