From: Vaibhav Sharma (mailvabs@gmail.com)
Date: Wed Feb 13 2008 - 03:40:53 ARST
Using 802.1x with Guest VLAN
http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.2_25_se/configuration/guide/sw8021x.html#wp1105979
On 2/13/08, Rich Collins <nilsi2002@gmail.com> wrote:
>
> I don't have a means to test it but I found this in my notes:
>
> Based upon the older pre-12.2(25)SE documentation, when using guest-vlan:
> - If client is dot1x capable but authentication fails > unauthorized
> (unless you used the the "dot1x guest-vlan supplicant" global
> configuration
> command)
> - If the client is not dot1x capable > guest-vlan
>
> Rich
>
> On Feb 11, 2008 3:31 PM, Mark Turner <markturner101@gmail.com> wrote:
>
> > Hello,
> >
> > How do you configure a Dot1x auth fail vlan if you are running an
> > older version of code on a 3550 and this parameter is not an option?
> > Does the auth fail vlan default to the guest vlan if running older
> > code versions?
> >
> > Thanks,
> >
> > Mark.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:48 ARST