From: Rich Collins (nilsi2002@gmail.com)
Date: Tue Feb 12 2008 - 22:16:30 ARST
How about configuring R5 as "ip ospf network point-to-multipoint
non-broadcast"? This should work with the hub a normal "ip ospf network
point-to-multipoint".
-Rich
On Feb 12, 2008 10:24 AM, Chan Hong <chan_hong33@yahoo.com> wrote:
> Dear all,
>
> In the IPExpert LAB 39, OSPF part. There is a hub & spoke between
> R2,R5,R6 and R6 is the hub. The task request to config "ip ospf network
> point-to-point" between R2 & R6 and config R5 to not broadcast ospf
> packet.
> The final confi is to config ip ospf network point-to-multipoint
>
> I'm ok with
> the R5 config, but this will make the ospf neighbor flapping because R6 is
> the
> point to point ospf interface. the neighbor won't be stable and I supose
> it's
> a problem before I read the final config.
>
> I'm really doubt that it won't
> acceable in the real lab, isn't it?
>
> Regards,
> Howard
>
>
> Yahoo!
> g62d8
> e. e (f ;g %o< f d= e& d= i 2g/ i; e."!
> h+ e
> e>http://hk.promo.yahoo.com/security/index.html d: h'#f 4e$ c
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:48 ARST