From: Peter Kingston (kingstonp.ccie@gmail.com)
Date: Tue Feb 12 2008 - 08:34:38 ARST
I am sure you would be able to use 2 nat statements if you used route-maps.
The routing would have to be dynamic, whether using floating statics, PBR
with tracking or a routing protocol to get it working correctly.
-- Regards,Peter Kingston Studying my CCIE
On Feb 12, 2008 4:26 PM, Matemane, Walter <walter.matemane@liberty.co.za> wrote:
> Hi group, > > > > I have a router with serial and dsl lines. I am using "overload" to NAT > my LAN to the serial interface IP. > > > > My dilemma comes when the primary goes down, where I have to manually > change my "ip nat" statement to overload on dsl interface IP as you > cannot have two > > "ip nat inside source list xx interface dialer1 overload" statements on > a router. > > > > i.e > > ! > > ip nat inside source list 100 interface serial0/0/0 overload > > ip nat inside source list 100 interface dialer1 overload > > ! > > > > I will appreciate any suggestion or workaround for this. > > > > Ta > > Tlatlaru Matemane > > > > > > > > ***************************************************************************** > ******* > The e-mail and attachments are confidential and intended only for selected > recipients. If you have received it in error, you may not in any way > disclose > or rely on the contents. You may not keep, copy or distribute the e-mail. > Should you receive it, immediately notify the sender of the error and > delete > the e-mail.Also note that this form of communication is not secure, it can > be > intercepted, and may not necessarily be free of errors and viruses in > spite of > reasonable efforts to secure this medium. > > > ***************************************************************************** > ******* > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:48 ARST