From: Geert Nijs (Geert.Nijs@simac.be)
Date: Mon Feb 11 2008 - 11:22:10 ARST
I am quiet sure that storm-control does not work on egress traffic, but on port ingress traffic (incoming traffic) only.
regards,
Geert
________________________________________
From: nobody@groupstudy.com [nobody@groupstudy.com] On Behalf Of wim.depauw@getronics.com [wim.depauw@getronics.com]
Sent: 11 February 2008 11:57
To: ccielab@groupstudy.com
Subject: Limiting traffic on a 3560/3550
Hi,
Can you confirm that I'm correct on the following topic :
When you want to limit egress traffic on a 3550 switch you can use the command
storm-control unicast ........
When you want to limit ingress traffic on a 3560 switch you can use MQC map with the police command .
On a 3560 you can limit egress traffic with the srr-queuee bandwidth limit
and you can limit ingress traffic also with MQOC map and police command
gr
wim
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:48 ARST