From: backbone systems (backbone.systems@gmail.com)
Date: Mon Feb 11 2008 - 05:57:56 ARST
Thank you all . It really helped .
On Feb 11, 2008 3:44 AM, Rich Collins <nilsi2002@gmail.com> wrote:
> Yes Dynamips includes a virtual ATM switch. I used this similar
> configuration and it looks like it works as you are expecting:
>
>
> R6:
>
> interface ATM4/0
> no ip address
> no atm ilmi-keepalive
> !
> interface ATM4/0.1 point-to-point
>
> ip address 12.12.12.1 255.255.255.0
> pvc 0/102
> !
>
> R8
> interface ATM4/0
> no ip address
> no atm ilmi-keepalive
> !
> interface ATM4/0.1 point-to-point
>
> ip address 12.12.12.2 255.255.255.0
> pvc 0/201
> !
>
>
> NET file
> [[Router R6]]
> model = 7200
> autostart = false
> slot4 = PA-A1
> A4/0 = ATMSW-1 1
>
>
> [[Router R8]]
> model = 7200
> autostart = false
> slot4 = PA-A1
> A4/0 = ATMSW-1 2
>
>
>
>
> [[ATMSW ATMSW-1]]
>
> 1:0:102 = 2:0:201
>
>
>
> -Rich
>
>
>
>
> On Feb 10, 2008 11:35 AM, Tony Schaffran (GS) <groupstudy@cconlinelabs.com>
> wrote:
> > Simply use the same PVC on each side and all should work fine.
> >
> > The only problem with a Point to Point connection is that you will not be
> > able to experiment using SVC's.
> >
> >
> >
> > Tony Schaffran
> > Network Analyst
> > CCIE #11071
> > CCNP, CCNA, CCDA,
> > NNCDS, NNCSS, CNE, MCSE
> >
> > www.cconlinelabs.com
> > Your #1 choice for online Cisco rack rentals.
> >
> >
> > -----Original Message-----
> >
> >
> >
> > From: Gary Duncanson [mailto:gary.duncanson@googlemail.com]
> > Sent: Sunday, February 10, 2008 9:23 AM
> > To: Tony Schaffran (GS)
> > Cc: Antonio Soares; backbone systems; ccielab@groupstudy.com
> > Subject: Re: Dynamips ATM Back to Back Config
> >
> > Tony,
> >
> > This seems to make sense to me al la frame switching.
> >
> > I don't know if dynamips offers an ATM switch. From the looks of Antonio's
> > reply it seems so.
> >
> > Anyway Im interested in this myself but not because I have dynamips..
> >
> > I have a couple of 4000 series at home with ATM interfaces I would like to
> > connect together without the expense and storage requirements of a
> > lightstream.
> >
> >
> > ----- Original Message -----
> > From: "Tony Schaffran (GS)" <groupstudy@cconlinelabs.com>
> > To: "'Antonio Soares'" <amsoares@netcabo.pt>; "'backbone systems'"
> > <backbone.systems@gmail.com>; "'Cisco certification'"
> > <ccielab@groupstudy.com>
> > Cc: "'Cisco certification'" <comserv@groupstudy.com>
> > Sent: Sunday, February 10, 2008 2:53 PM
> > Subject: RE: Dynamips ATM Back to Back Config
> >
> >
> > > Your config will not work for what he is asking.
> > >
> > > For a back to back config, you need to use the same pvc on each side
> since
> > > there is nothing in the middle doing the switching between 0/102 and
> > > 0/201.
> > >
> > >
> > > Tony Schaffran
> > > Network Analyst
> > > CCIE #11071
> > > CCNP, CCNA, CCDA,
> > > NNCDS, NNCSS, CNE, MCSE
> > >
> > > www.cconlinelabs.com
> > > Your #1 choice for online Cisco rack rentals.
> > >
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > > Antonio Soares
> > > Sent: Sunday, February 10, 2008 3:05 AM
> > > To: 'backbone systems'; 'Cisco certification'
> > > Cc: 'Cisco certification'
> > > Subject: RE: Dynamips ATM Back to Back Config
> > >
> > > You need to define an ATM switch in Dynamips:
> > >
> > > ################
> > > # ATM SWITCH-1 #
> > > ################
> > >
> > > [[ATMSW ATMSW-1]]
> > >
> > > 1:0:102 = 2:0:201
> > >
> > > Basic configs:
> > >
> > > R1:
> > >
> > > interface ATM3/0.1 point-to-point
> > > ip address 12.12.12.1 255.255.255.0
> > > pvc 0/102
> > >
> > > R2:
> > >
> > > interface ATM3/0.1 point-to-point
> > > ip address 12.12.12.2 255.255.255.0
> > > pvc 0/201
> > >
> > >
> > > Regards,
> > >
> > > Antonio Soares
> > > CCIE #18473 (R&S),CCNP,CCIP,JNCIA-ER,JNCIS-ER
> > > http://pwp.netcabo.pt/amsoares/
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > > backbone systems
> > > Sent: domingo, 10 de Fevereiro de 2008 6:05
> > > To: Cisco certification
> > > Cc: Cisco certification
> > > Subject: Dynamips ATM Back to Back Config
> > >
> > > Hi,
> > >
> > > I am using Dynamips for ATM PA-A1 for back to back configuration.
> > >
> > > Can someone send me the basic config for the two routers connected back
> to
> > > back.
> > >
> > > It is the first time i am handling the ATM interfaces .
> > >
> > > Please send me the basic config to enable ping.
> > >
> > > BB
> > >
> > > _____________________________________________________________________
> > > Subscription information: http://www.groupstudy.com/list/comserv.html
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:48 ARST