From: Edouard Zorrilla (ezorrilla@tsf.com.pe)
Date: Sat Feb 09 2008 - 11:26:45 ARST
Because this is a loopback interface,
Regards
----- Original Message -----
From: "Alec" <packtmon@yahoo.com>
To: "Group Study" <ccielab@groupstudy.com>
Sent: Friday, February 08, 2008 10:39 AM
Subject: OT: Mac addr of Loopback - Where did it go?
> Hi Guys,
>
> Why isn't the mac address shown in the output below?
>
> #sh int lo0
> Loopback0 is up, line protocol is up
> Hardware is Loopback
> Description: |||Y||||||Software Defined Interface. ITSM SSC 4319371
> Internet address is 155.125.175.1/32
> MTU 1514 bytes, BW 8000000 Kbit, DLY 5000 usec,
> reliability 255/255, txload 1/255, rxload 1/255
> Encapsulation LOOPBACK, loopback not set
> Keepalive set (10 sec)
> Last input 00:00:01, output never, output hang never
> Last clearing of "show interface" counters 7w2d
> Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
> Queueing strategy: fifo
> Output queue: 0/0 (size/max)
> 5 minute input rate 0 bits/sec, 0 packets/sec
> 5 minute output rate 0 bits/sec, 0 packets/sec
> 0 packets input, 0 bytes, 0 no buffer
> Received 0 broadcasts (966410 IP multicasts)
> 0 runts, 0 giants, 0 throttles
> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> 966410 packets output, 57984600 bytes, 0 underruns
> 0 output errors, 0 collisions, 0 interface resets
> 0 output buffer failures, 0 output buffers swapped out
>
>
> Thanks
>
>
> ---------------------------------
> Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it
> now.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:48 ARST