From: Alec (packtmon@yahoo.com)
Date: Fri Feb 08 2008 - 13:39:12 ARST
Hi Guys,
Why isn't the mac address shown in the output below?
#sh int lo0
Loopback0 is up, line protocol is up
Hardware is Loopback
Description: |||Y||||||Software Defined Interface. ITSM SSC 4319371
Internet address is 155.125.175.1/32
MTU 1514 bytes, BW 8000000 Kbit, DLY 5000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation LOOPBACK, loopback not set
Keepalive set (10 sec)
Last input 00:00:01, output never, output hang never
Last clearing of "show interface" counters 7w2d
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/0 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (966410 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
966410 packets output, 57984600 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
Thanks
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:48 ARST