From: Marc La Porte (marc.a.laporte@gmail.com)
Date: Fri Feb 08 2008 - 07:08:13 ARST
Hi guys,
I've configured PPPoFR exactly as described by Brian McGahan (
http://blog.internetworkexpert.com/2008/01/07/understanding-ppp-over-frame-relay-pppofr/),
but I can get it to work with Dynamips.
Rack1R1#sh run | sec Serial1/0|Virtual-Template1
interface Serial1/0
no ip address
encapsulation frame-relay
serial restart-delay 0
frame-relay interface-dlci 201 ppp Virtual-Template1
interface Virtual-Template1
ip address 10.0.0.1 255.0.0.0
ppp chap hostname Rack1R1
ppp chap password 0 CISCO
Rack1R2#sh run | sec Serial1/0|Virtual-Template1
interface Serial1/0
no ip address
encapsulation frame-relay
serial restart-delay 0
frame-relay interface-dlci 102 ppp Virtual-Template1
interface Virtual-Template1
ip address 10.0.0.2 255.0.0.0
ppp chap hostname Rack1R2
ppp chap password 0 CISCO
Rack1R1#sh ip int brief | sec Serial1/0|Virtual-Access|Virtual-Template
Serial1/0 unassigned YES unset up
up
Virtual-Access1 unassigned YES unset down
down
Virtual-Template1 10.0.0.1 YES manual down
down
Virtual-Access2 10.0.0.1 YES TFTP down
down
Rack1R2#sh ip int brief | sec Serial1/0|Virtual-Access|Virtual-Template
Serial1/0 unassigned YES unset up
up
Virtual-Access1 unassigned YES unset down
down
Virtual-Template1 10.0.0.2 YES manual down
down
Virtual-Access2 10.0.0.2 YES TFTP down
down
The Virtual-Access1 remains down... tried debug ppp, but no output
whatsoever... I'm sure it's simple, but what am I doing wrong?
Thanks for your help!
Marc (the Netherlands)
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:48 ARST