From: Antonio Soares (amsoares@netcabo.pt)
Date: Wed Feb 06 2008 - 16:51:42 ARST
You don't need MPLS. Used without MPLS, this is known as "Multi-VRF" or
"VRF-Lite".
Check these documents:
http://www.cisco.com/en/US/technologies/tk648/tk828/tk363/technologies_white
_paper0900aecd8012033f.html
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12244se/scg/swip
rout.htm#wp1320198
Regards,
Antonio Soares
CCIE #18473 (R&S),CCNP,CCIP,JNCIA-ER,JNCIS-ER
http://pwp.netcabo.pt/amsoares/
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie-lab
Sent: quarta-feira, 6 de Fevereiro de 2008 2:55
To: ccielab@groupstudy.com
Subject: IP Vrf
Does anyone have a good explanation or link to describe ip vrf forwarding.
I am trying to provide new customer transports through my company ip network
running ospf.
Can i utlize ip vrf to separate their routing instances or do I need mpls.
Tx
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:47 ARST