From: Ronnie Angello (ronnie.angello@gmail.com)
Date: Wed Feb 06 2008 - 12:32:43 ARST
If you insert the card into a dual fabric enabled slot, the card will have
2x 20Gbps channels to the fabric. Do a 's fabric' to verify. You should
see channel 0 and channel 1 (both speed 20Gbps) for the slot where you
installed the card. Note that this is with or without the DFC.
On Feb 5, 2008 10:53 AM, Rookie Ccie <rookie.ccie@gmail.com> wrote:
> Dear Group,
>
> Please let me know whether we need to use DFC-3C cards on 67xx line cards
> to
> get 40Gbps per slot capacity. I went through lot of Cisco doc's but could
> not find that it is required (DFC-3C).
>
>
> Regards
>
> Uchil
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Ronald Angello CCIE #17846
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:47 ARST