From: Marc La Porte (marc.a.laporte@gmail.com)
Date: Tue Feb 05 2008 - 06:37:20 ARST
Hi Marit,
I would use an ACL instead to filter out hello packets, or (if allowed) use
the passive-interface.
To me changing the network type is not a clean and nice solution (although
it works and can be used if you are restricted)
HTH,
Marc
On Feb 5, 2008 5:20 AM, <maritpra@hotmail.com> wrote:
> Hello,
>
> To disable OSPF hello out of Ethernet Interface, can we do like this?
>
> 1) Use "passive interface e0/0"
>
> or
>
> 2) Use "ip ospf network non-broadcast" under e0/0 interface
>
> Which one is correct or both?
>
> - From my testing, I did both then debug and found out that both disable
> hello packets, so i would like to know your guy oppinoin becasue some WB
> refered to only 1) as correct answer.
>
> Regard,
> Marit
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:47 ARST