From: Anshuk Kesarwani (anshuk.ccie@gmail.com)
Date: Mon Feb 04 2008 - 06:15:36 ARST
Hi,
I also will put the configuration on all the ports in shutdown mode and then
unshut them.
Try this after clearing the configs on the ports and again reapplying the
configs in shutdown mode and then making thm come up.
Hope this will work.
Regards
Anshuk
On 2/1/08, ysoyibo@hotmail.com <ysoyibo@hotmail.com> wrote:
>
> I have set up my port channels and they are not coming up. I have made
> sure that the interface setting are the same of all interfaces. Also
> 'channel-group X mode on' is congfigured on all. I see err-disable on the
> interfaces and the port channels not coming on.
>
> How can I start to troubleshoot this problem and eventually what is(are)
> the probable causes of this keeping in mind what has been said earlier.
>
> Rgds
>
> Yemi
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:47 ARST