From: shiran guez (shiranp3@gmail.com)
Date: Sun Feb 03 2008 - 10:51:07 ARST
ok, in general ocasions you can add also the notify syslog and enable the
logging host <syslog_ip>
you can see the example bellow:
*Mar 1 00:09:48.971: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged
command:notify syslog
*Mar 1 00:09:49.427: %SYS-5-CONFIG_I: Configured from console by
console R1(config)#int
lo111
R1(config-if)#ip add 1
*Mar 1 00:11:41.667: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged
command:interface lo111
*Mar 1 00:11:42.583: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Loopback111, changed state to up
R1(config-if)#ip add 111.111.111.111 255.255.255.255
R1(config-if)#^Z
R1#
*Mar 1 00:11:57.155: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged
command:ip address 111.111.111.111 255.255.255.255
*Mar 1 00:11:57.863: %SYS-5-CONFIG_I: Configured from console by console
R1#
On Feb 3, 2008 2:44 PM, Mohammad <www.engineer@gmail.com> wrote:
>
> I am not talking about the procotr since I am 101% sure that he will not
> touch the configuration till the end of the lab time ...
>
> I am asking generally ....
>
>
> On 2/3/08, shiran guez <shiranp3@gmail.com> wrote:
> >
> > you do not have a way to set a timestemp on this logging type as far as
> > I know, but you can activate the loggin buffered and see the messages:
> >
> > *Feb 4 11:57:16.904 UTC: %SYS-5-CONFIG_I: Configured from console by
> > user on vty0 (x.x.x.x)
> >
> > you know when you left for lunch and when you came back, but I really
> > think you will be waisting your time on a goose chase it is better to put
> > your time into the lab exam and verification rather then trying to see if
> > your proctor is messing with you :-)
> >
> >
> > On Feb 3, 2008 10:28 AM, Mohammad <www.engineer@gmail.com> wrote:
> >
> > > Hi Shiran,
> > >
> > > Is there a way that this config logger shows a timestamp when did the
> > > change take place?
> > >
> > >
> > > On 2/1/08, shiran guez <shiranp3@gmail.com> wrote:
> > >
> > > > You can set on all the routers:
> > > >
> > > > Router(config)#archive
> > > > Router(config-archive)#log config
> > > > Router(config-archive-log-cfg)#logging enable
> > > > Router(config-archive-log-cfg)#logging size 1000
> > > > Router(config-archive-log-cfg)#^Z
> > > > HOME-GUEZ#sh archive log config all
> > > > idx sess user@line Logged command
> > > > 1 1 shiranp3@vty0 | logging enable
> > > > 2 1 shiranp3@vty0 | logging size 1000
> > > > Router#
> > > > but I really think the proctor have other things to do other then
> > > > mess with
> > > > your config!
> > > > On Jan 31, 2008 2:34 PM, dave dave <funccie@gmail.com> wrote:
> > > >
> > > > > Hi Expert,
> > > > >
> > > > > I have heard that sometime procter do the changes to our config.
> > > > I just
> > > > > want to know what are the way we can find that he has done some
> > > > changes to
> > > > > config.
> > > > >
> > > > > Is any way we can track this?
> > > > >
> > > > > Regards,
> > > > > Dave
> > > > >
> > > > >
> > > > _______________________________________________________________________
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Shiran Guez
> > > > MCSE CCNP NCE1
> > > > http://cciep3.blogspot.com
> > > > http://www.linkedin.com/in/cciep3
> > > >
> > > >
> > > > _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > > >
> > >
> > >
> > >
> > > --
> > > Best Regards,
> > > Mohammad
> >
> >
> >
> >
> > --
> > Shiran Guez
> > MCSE CCNP NCE1
> > http://cciep3.blogspot.com
> > http://www.linkedin.com/in/cciep3
> >
>
>
>
> --
> Best Regards,
> Mohammad
-- Shiran Guez MCSE CCNP NCE1 http://cciep3.blogspot.com http://www.linkedin.com/in/cciep3
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:47 ARST