From: John (jgarrison1@austin.rr.com)
Date: Thu Jan 31 2008 - 15:25:05 ARST
The last thing I want to do is wait possibly 179 seconds for a serial
interface to cycle. It would be faster to do a sh run and see if the
default hold time has been changed with 'ip eigrp hold-time' if it has not
then it's the default hold time
----- Original Message -----
From: "Luan Nguyen" <luan.m.nguyen@gmail.com>
To: "John" <jgarrison1@austin.rr.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, January 30, 2008 10:28 AM
Subject: Re: EIGRP hold time
> That's why you have to use your up arrow key a few time to monitor that
> number. It will goes down until it receive a hello then it will shot up
> to
> the configured number...by watching it and give it some thought, you will
> be
> able to figure out the hello and hold time.
>
> -lmn
>
> On Jan 30, 2008 11:20 AM, John <jgarrison1@austin.rr.com> wrote:
>
>> The hold time displayed in "sh ip eigrp neigh" is the amount of time
>> left
>> before the neighbor is declared dead, not the configured hold time
>>
>> ----- Original Message -----
>> *From:* Luan Nguyen <luan.m.nguyen@gmail.com>
>> *To:* John <jgarrison1@austin.rr.com>
>> *Cc:* ccielab@groupstudy.com
>> *Sent:* Wednesday, January 30, 2008 12:15 AM
>> *Subject:* Re: EIGRP hold time
>>
>> I would do a hidden command show ip eigrp timers. up arrow a few times
>> and you'll figure out the numbers. sho ip eigrp neighbor does have the
>> hold time.
>>
>> -lmn
>>
>> On Jan 29, 2008 12:50 PM, John <jgarrison1@austin.rr.com> wrote:
>>
>> > Is there a way to show what the eigrp holdtime and hello interval are?
>> >
>> > I cant't find it in the docs
>> >
>> > JG
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:47 ARST