From: Gary Duncanson (gary.duncanson@googlemail.com)
Date: Wed Jan 30 2008 - 12:14:35 ARST
Hi Cindy,
Do dynamic sticky and static achieve more or less the same thing then is
this sense?
Always nice to know alternatives.
Rgds
Gary
----- Original Message -----
From: "cindy tanner" <cindy.a.tanner@gmail.com>
To: "'Fang Gao'" <fanggao@gmail.com>; "'Darren Johnson'"
<dazza_johnson@yahoo.co.uk>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, January 30, 2008 2:50 AM
Subject: RE: Port-security - quick one ;-)
> Just a quick add to the response below.
>
> If you configure 'switchport port-sec max 5', Five macs will be
> dynamically
> learned. If you reboot, they will be lost. However, if you add the
> 'sticky' command, they will stay after reboot.
>
> Good Luck on the 21st!
>
> Cindy
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Fang
> Gao
> Sent: Monday, January 28, 2008 9:41 PM
> To: Darren Johnson
> Cc: ccielab@groupstudy.com
> Subject: Re: Port-security - quick one ;-)
>
> Hi, Darren,
>
> A static mac entry is saved in running-configure, as well as
> startup-config
> if you copy runing to startup-config. It will not be lost after reboot.
>
> I did the following at cat 3560.
>
>
> interface FastEthernet0/20
>
> switchport mode access
>
> switchport port-security
>
> switchport port-security mac-address 0050.04fd.9f73
>
> After reboot, the above configuration is still in Fa0/20.
>
> You can try it on your lab. It is simple.
>
>
> HTH
>
> Fang
> On Jan 28, 2008 5:22 AM, Darren Johnson <dazza_johnson@yahoo.co.uk> wrote:
>
>> Hey all. I'm stuggling to get me head around this. With port-security,
>> if I configure a static mac entry (switchport port-security
>> mac-address
>> xxxx.xxxx.xxxx) then it is added to the running-config only - doesn't
>> survive a reboot. With 'sticky' port-security, the dynamically learned
>> MAC is added to the running config. However, this too will not survive
>> a reboot.
>> Therefore, whats the difference?!?
>>
>> With BOTH methods, you STILL NEED TO SAVE the RUNNING-CONFIG - or they
>> are lost (of course the sticky will get re-learned). The only
>> difference I can see between the two, is that:
>> Sticky automatically adds the MAC address to running-config Static
>> configuration requires manual entry of the MAC address to
>> running-config
>>
>> Any thoughts/comments?
>>
>> Dazzler
>>
>> P.S. My lab is 21st Feb Brussells, anyone else out there that day?
>>
>>
>>
>> ___________________________________________________________
>> Inbox full of spam? Get leading spam protection and 1GB storage with
>> All New Yahoo! Mail. http://uk.docs.yahoo.com/nowyoucan.html
>>
>> ______________________________________________________________________
>> _ Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:02 ARST