From: ccievoice1 (ccievoice1@gmail.com)
Date: Tue Jan 29 2008 - 00:07:08 ARST
And, what about Voice?
Thanks
On Jan 28, 2008 7:54 PM, Roman Rodichev <roman@iementor.com> wrote:
> Not yet
>
> Roman Rodichev
> 5xCCIE #7927 (R&S, Security, Voice, Storage, Service Provider)
> Instructor, Content Developer. ieMentor Corporation
> http://www.iementor.com
> Y!M: roman7927
>
> > -----Original Message-----
> > From: Gary Duncanson [mailto:gary.duncanson@googlemail.com]
> > Sent: Monday, January 28, 2008 3:08 AM
> > To: subodh.rawat@wipro.com
> > Cc: ccielab@groupstudy.com; Roman Rodichev
> > Subject: Re: How i became CCIE -- caution Huge Post
> >
> > Don't IEMENTOR do R&S?
> >
> > Roman?
> > ----- Original Message -----
> > From: <subodh.rawat@wipro.com>
> > To: <farhan.anwar@gmail.com>; <ccielab@groupstudy.com>
> > Sent: Monday, January 28, 2008 3:17 AM
> > Subject: RE: How i became CCIE -- caution Huge Post
> >
> >
> > > Nice post Farhan...Surely will help many aspirants.
> > >
> > > IEMENTOR for R&S????
> > >
> > > Regards
> > > Subodh
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > > Farhan Anwar
> > > Sent: Sunday, January 27, 2008 6:57 AM
> > > To: Cisco certification
> > > Subject: How i became CCIE -- caution Huge Post
> > >
> > > Hi All,
> > >
> > > Since my last post regarding my CCIE# i have received countless
> unicasts
> > > from different professionals asking for advice on how to start their
> > > studies and how i did it in the first attempt. Finally since I am
> still
> > > resting and evaluating Job Offers in my mailbox :) , I have decided to
> > > write my journey towards becoming a ccie. I couldn't find any better
> > > place than the GS itself so pardon me if you don't like the size of
> it.
> > > Here it goes, pardon me for any typos and NO I don't work for any
> > > workbook vendor ;), telling ya straight.
> > >
> > > I started preparing for the CCIE roughly 4 years ago when i did the
> CCIE
> > > Routing & Switching Training from a local institute during my studies.
> > > But then I entered in the professional field, got married ;) and
> things
> > > slowed down to a halt due to my OTHER activities.
> > >
> > > I started my personal goal again over 1.5 years ago but things were
> > > going very slow, until i finally decided to take CCIE Certification
> > > Seriously and devote time and resources to it, i started studying in
> > > nights and on whole weekends. For Practicing I was in search of
> low-cost
> > > lab equipment when a friend told me about dynamips as a Cisco 7200
> > > Router Simulator; i was impressed with the performance and its ease of
> > > use. I immediately started searching for its features, configuration
> > > settings and found a detailed article from Brian Mcghan of
> > > internetworkexpert explaining dynamips, furthermore the HACKI's forum
> > > was very much helpful in the initial stages of dynamips / dynagen
> > > experiences.
> > >
> > > I tuned, tweaked and optimized dynamips configuration files and idlepc
> > > values for one month while practicing my Routing Techniques on it, and
> > > it was in JANUARY 2007. A CCIE Friend told me about
> > > internetworkexpert.com. And also about the groupstudy.com, At that
> time
> > > I didn't have a clear view of what to study how to do it and what to
> > > practice for the CCIE due to a number of topics being covered in the
> R&S
> > > Program. Brian's detailed CCIE R&S Topics list in their Free
> Resources
> > > section helped me enormously till the last day for tracking my
> > > performance and topics to cover.
> > >
> > > I already had a strong base in IGP and BGP but i was weak in Advanced
> > > Switching, QoS, Security and Multicasting. For getting an edge in
> > > non-core topics i reviewed KnowledgeNet QoS and Multicast. I polished
> my
> > > security and Switching skills using the Cisco DocCD.
> > >
> > > Afterwards, i started viewing Class on Demand Videos of Internetwork
> > > Expert. After digesting that video of several hours in one month by
> > > seeing it again and again. I started doing Advanced Technology Labs on
> > > Dynamips. It took me another one and a half month to finish them off
> > > completely and tuning Dynamips Topological File for Advanced
> Technology
> > > Labs, i changed the interfaces, switch connections and frame-relay
> > > topology to suit my needs. Some Tasks were not supported in Dynamips
> > > such as Dot1x Tunneling, VLAN ACLs, RSPAN, Dynamic Trunking etc. so i
> > > skipped them and lateron rented a rack several times for practicing
> > > those specific topics. During this time, i reviewed the CoD countless
> > > times to gain a deeper understanding of technologies.
> > >
> > > My next move was to purchase a dedicated dynamips server to support my
> > > topology as my laptop was not enough for it, i purchased an AMD Athlon
> > > 64 4400+ with 2 GiG RAM as a dynamips server machine. Here Scott
> > > Vermillion came to the rescue as I was using Windows as my primary OS
> > > but I failed miserably in running the full topology, Scott insisted
> and
> > > encouraged me to use linux as at that time he was using MacOSX.
> > > You can find my huge post in the GS Archives.
> > >
> > > I started doing the Core-Labs as my next move to improve my IGP, BGP
> and
> > > Redistribution skills, additional one month just for the 10 Labs, they
> > > surely were hard as i think now :). Core Labs were done easily done on
> > > the Dynamips Server that i had purchased because they focused on IGP,
> > > Redistribution and BGP the most. Switching was mostly simple and when
> i
> > > was stuck with an unsupported task, i always skipped it and did them
> > > later on a rented rack if I had the chance.
> > >
> > > Finally i started R&S Workbook Labs, the first five labs were just
> warm
> > > up labs as the authors said but they looked really hard to me at the
> > > first glance, they can be done using Dynamips but some tasks were
> > > skipped in Switching. Initially it took me 3 days to finish only one
> lab
> > > with research on every topic. When i reached Lab5 i gained speed,
> > > accuracy and got familiar with most of the problems. Lab5 was done in
> > > 13 Hours in first attempt on my dynamips.
> > >
> > > I continued doing the workbook labs 6,7,8,9 and 10. The hardest of all
> > > was Lab 7 which again took me two days to figure out. After finishing
> > > Lab10 i almost knew all of the problems and i could solve most of the
> > > tasks at the back of my head. Labs 11 - 13 i did with a pencil just to
> > > save some time. Then I did all the remaining 14 b 20 Labs. Next, I
> > > rented rack equipment and did several labs on them again. Again My
> CCIE
> > > friend came to rescue and generously gave access to his own rack with
> 9
> > > Routers and 2 3550's I used it to do Labs again and gained some speed
> > > and accuracy. Thanks Ghias for that.
> > >
> > > In total I did the IE Labs 3 times on different equipment, 1st time on
> > > Dynamips, 2nd time on rented rack and third time on Physical Rack.
> > > Finally, in the last month, I reviewed most of the content again,
> > > reviewed the Class on Demand Videos to refresh some of the topics such
> > > as Catalyst QoS (freely available on internetworkexpert free resources
> > > section), IP/IOS Services, Multicasting, Security and BGP. I took
> > > references from the DocCD to memorize where to find stuff like Router
> > > Menus, WCCP, Nat, Reflexive ACLs, CBAC, IGMP Filtering, Multicast Stub
> > > Routing, IPv6 etc.
> > >
> > > I sat for lab in dubai on 22nd Jan 2008 and fortunately attained the
> > > number in the first attempt. For the last 2 nights i couldn't sleep
> and
> > > i just kept on praying and building strategies like should i do
> > > frame-relay first restart the routers then go on switching or the
> > > otherway around etc etc..
> > >
> > > Well, I hope this LONG LONG Post will help most of the people who
> > > emailed me for guidance on how to start and where to search the
> > > material. I specifically used IE Material but I have also seen other
> > > vendor's workbooks such as IPEXPERT, IEMENTOR, Soup-to-Nuts etc. and I
> > > have found them equally good for practicing the labs. It's a personal
> > > preference and what your company/budget allows you to purchase.
> > >
> > > Lastly, i would say, this was my technique, i cannot guarantee that
> > > following this one could lead you to success but it worked for me. I
> did
> > > the core-labs first, authors dont recommend this way, but i did it.
> > >
> > > Regards,
> > > --
> > > Farhan Anwar
> > > CCIE(R) .N9lN9..N9lN9. #19871
> > > www.farhananwar.com
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > > Please do not print this email unless it is absolutely necessary.
> Spread
> > > environmental awareness.
> > >
> > > The information contained in this electronic message and any
> attachments
> > > to this message are intended for the exclusive use of the addressee(s)
> and
> > > may contain proprietary, confidential or privileged information. If
> you
> > > are not the intended recipient, you should not disseminate, distribute
> or
> > > copy this e-mail. Please notify the sender immediately and destroy all
> > > copies of this message and any attachments.
> > >
> > > WARNING: Computer viruses can be transmitted via email. The recipient
> > > should check this email and any attachments for the presence of
> viruses.
> > > The company accepts no liability for any damage caused by any virus
> > > transmitted by this email.
> > >
> > > www.wipro.com
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:02 ARST