From: Mounir Mohamed (mounir.mohamed@gmail.com)
Date: Sun Jan 27 2008 - 06:26:39 ARST
I tried to catch it with debug IP packet details attached with ACL for
protocol# 88 but nothing appears, but I "Show IP EIGRP topology" on the
origin router will show you the routes that directly connected and
advertised through EIGRP.
*Origin Router*
Rack1R3>show ip eigrp topology
IP-EIGRP Topology Table for AS(100)/ID(150.1.3.3)
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - reply Status, s - sia Status
P 10.3.3.0/24, 1 successors, FD is 128256
via Connected, Loopback3
P 10.0.0.0/24, 1 successors, FD is 28160
via Connected, FastEthernet0/0
*Receiving router*
Rack1R1#show ip eigrp topology
IP-EIGRP Topology Table for AS(100)/ID(150.1.1.1)
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - reply Status, s - sia Status
P 10.3.3.0/24, 1 successors, FD is 156160
via 10.0.0.3 (156160/128256), FastEthernet0/0
P 10.0.0.0/24, 1 successors, FD is 28160
via Connected, FastEthernet0/0
On Jan 25, 2008 5:56 PM, Monica Belluci <mpls1979@gmail.com> wrote:
> If I am running EIGRP with my backbone router .
> How I will come to know that which routes I am going to advertise to
> Backbone ?
> In RIP you can know by Debug ip rip ( Sending update)
> how you will come to know in EIGRP any Debug.
>
> Please suggest
>
> Thanks
> Monica
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Best Reagrds, Mounir Mohamed, CCIE #19573
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:01 ARST