From: kang lee (kanghlee@gmail.com)
Date: Fri Jan 25 2008 - 03:16:11 ARST
GS,
I was doing a QoS Lab and that raised one question about QoS
verificiaton/grading. Let's suppose it requires to guarantee no delay for
h323 traffic from R1<->R3<->R5. It also requires minimum 384Kb from source
R1 to destination R5 to work properly.
1. How should I verify that configuration is correct? Assume we can use any
method to prioritized H323 traffic. Or what is the best way to verify the
end-to-end QoS. Do we have to set up some sla/rtr for it or just
configuration verification will be fine?
2. Almost same question as above. How do they grade this? configuration or
actually generate the traffic.
I made up above scenario, so it is very vague. The key point is requiring us
to do end-to-end QoS and what level of verification we need to do. How are
they going to grade that.
Any comment will be appreciated.
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:01 ARST