From: Darby Weaver (darbyweaver@yahoo.com)
Date: Wed Jan 23 2008 - 21:09:41 ARST
Dude,
What does your show vlan look like?
Sounds like you have inherited some vlans via VTP and
maybe you have a few too many and not necessarily the
ones you want on that switch.
Check it and see.
Yep you said you have 65 active active vlans on the
switch...
And here I thought the max was 64 for some reason.
How many are really needed on that switch?
--- Greg Wendel <gwendel@gmail.com> wrote:
> I don't have a 2950 handy, but do you have any
> strange files on the root of
> the switch that may be changing or interfering with
> your environment
> variables? On a 3560 we would do
> "dir all-filesystems"
>
>
>
>
> On Jan 22, 2008 6:17 PM, Jason Madsen <
> madsen.jason@gmail.com> wrote:
>
> > I know 3550/3560 level switches have an "SDM"
> feature that allows the
> > manipulation of device resources based on its
> usage i.e. VLANs, Routing,
> > etc., which could be of some help, but I don't see
> this option listed in
> > the
> > DOCs CD under the 2950 with the IOS you specified.
> May be something to
> > look
> > into though. Anyone else have any ideas?
> >
> > Jason
> > On Jan 22, 2008 4:28 AM, Amr CCIE
> <amr.ccie@gmail.com > wrote:
> >
> > > Dear All,
> > > I have a problem with one of my
> switches (Cisco 2950) when
> > > adding a new vlan on it
> > > The following message appears when configuring
> new vlan
> > >
> > > *POP-switch#conf t*
> > > Enter configuration commands, one per line. End
> with CNTL/Z.
> > > *POP-switch(config)#vlan 71*
> > > POP-switch(config-vlan)#^Z
> > > Proposed configuration has too many VLANs for
> this device's core memory
> > > resources. Either reduce the number of VLANs
> proposed or use another
> > VTP
> > > device to configure database. (The latter will
> cause this device to
> > enter
> > > TRANSPARENT mode automatically if propagated to
> it.)
> > > APPLY VLAN changes failed.
> > >
> > >
> > > *POP-switch#sh vlan id 71
> > > *VLAN id 71 not found in current VLAN database
> > >
> > > Show memory gives that the Switch has a fee
> memory
> > >
> > > *POP-switch#sh memory*
> > > Head Total(b)
> Used(b) Free(b)
> > > Lowest(b) Largest(b)
> > > Processor 80BA6420 4803552 2315660
> 2487892 2359716
> > > 2444004
> > > I/O A08C16E0 3034400 689092
> 2345308
> > > 2305068 2344440
> > >
> > >
> > > I have only 65 active vlans on the switch
> > > I tried to add the vlan using the vlan database
> but the same message
> > > appears
> > > too
> > >
> > > I am using the following IOS image "*
> c2950-i6q4l2-mz.121-19.EA1c.bin*"
> > >
> > > Any help on this behavior
> > >
> > > Regards
> > >
> > >
>
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:01 ARST