From: Farrukh Haroon (farrukhharoon@gmail.com)
Date: Wed Jan 23 2008 - 03:26:52 ARST
Have a look at this:
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e76.shtml
Regards
Farrukh
On Jan 22, 2008 8:23 PM, nhatphuc <nhatphuc@gmail.com> wrote:
> Hi Group
>
> I want to nat an FTP server in my inside network.
>
> If I nat like this:
>
> ip nat inside source static tcp 192.168.1.2 20 interface Dialer1 20
> ip nat inside source static tcp 192.168.1.2 21 interface Dialer1 21
>
> Everything works well
>
> But If I nat to port 210 on the outside, it doesn't work:
>
> ip nat inside source static tcp 192.168.1.2 20 interface Dialer1 20
> ip nat inside source static tcp 192.168.1.2 21 interface Dialer1 210
>
> Total commander stops responding when downloading file list. FTP Server
> says
> it couldn't connect to peer, client says can't open data connection. I'm
> using active FTP.
>
> Why is it so? And how do I fix it?
>
> Thanks
>
> Phuc
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:00 ARST