From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Tue Jan 22 2008 - 23:42:17 ARST
Do both solutions meet the requirements? If they do the answer if yes ;-)
Look at it this way. They don't grade your "solution" they grade to see
if you met the requirements.
HTH,
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: +1-775-544-1653 (Outside the US and Canada)
>----- Original Message -----
Subject: Static or Dynamip RP or anyone is ok?
Date: Tue, January 22, 2008 4:55
From: "dave dave" <funccie@gmail.com>
> Hi,
>
> If task says use most reliable interface on R2 as RP & use pim
sparse mode
> only.
>
> Below is the answer
>
> 1. Static RP as lookback interface of R2 or
> 2. Dynamic RP & mapping agent as R2 lookback interface with auto rp
> listner
>
> Are both answer ok?
>
> Regards
> Dave
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:00 ARST