From: Amr CCIE (amr.ccie@gmail.com)
Date: Tue Jan 22 2008 - 07:06:35 ARST
Dear All,
I have a problem in one of My routers (Cisco 7206VXR (NPE-G1))
, when i enable IPv6 on the POS Interface , i found the directly connected
IP address disappear from the routing table and the following log message
appears
*"Jan 18 07:58:11.306: %IPV6-4-IDB: Interface POS3/0 state mismatch. IPv6
state is up, interface is down"*
I am running IOS version Version 12.4(18) "*c7200-js-mz.124-18.bin*" on my
router "*Cisco 7206VXR (NPE-G1)*"
I have trying changing the IOS several times with no change
The configuration of the POS Interface is as follows:
*Router#sh run int pos 3/0*
Building configuration...
Current configuration : 300 bytes
!
interface POS3/0
encapsulation ppp
load-interval 30
ipv6 address 2001:1A00:ACCA:1003::2/64
crc 32
pos framing sdh
pos scramble-atm
hold-queue 1500 in
end
*Router#sh ipv6 route*
IPv6 Routing Table - 2 entries
Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
U - Per-user Static route
I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary
O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
L FE80::/10 [0/0]
via ::, Null0
L FF00::/8 [0/0]
via ::, Null0
Any advice regarding this behavior
Appreciate your feedback
Regards
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:00 ARST