From: Uchil Perera (uchil.groupstudy@yahoo.com)
Date: Mon Jan 21 2008 - 17:11:47 ARST
Hi,
The difficulty level in IE labs are just guidelines cos the actual difficulty depends on your knowledge, strengths and weaknesses.
For example, you might find a lab rated as 10 to be more easier then a lab rated at 6.
Regards
Uchil
CCIE # 18536
Shine Joseph <shinepjoseph@iprimus.com.au> wrote:
I am wondering how you would actually rate the difficulty level of a
particular lab as 9 or 10. If the scenario requires a command which does not
commonly used, such as leak-map or a situation has many different options
and do want to decide to pick the right solution?
I think, if you know how, why and when to use the leak-map, in my previous
example, this is any more a difficult task. Or if you know when you want to
use bgp dmzlink-bw command, the scenario is any more difficult.
So, I am really confused how you would quantitatively say a lab has a
difficulty rating of 9, 10 or 10+.
Any comments welcome.
Regards,
Shine
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Phillip Arthur
Sent: Thursday, 17 January 2008 5:51 AM
To: ccielab@groupstudy.com
Subject: RE: Difficult level between IE Mock lab vs Real Lab
All of those mock labs are termed by IE as hard or harder than the real lab.
I believe labs 1-4 are in the range of a 6-8 on their difficulty scale and
IE
states a difficulty rating of 7 is supposed to be around the difficulyt of
the
real CCIE Lab. The new labs, 5-7 are 9 and 10's I believe.
Once you have scheduled a Mock lab you can preview the point structure and
areas. In this preview they give the difficulty rating. > Date: Tue, 15
Jan
2008 14:12:27 +0700> From: failnet@gmail.com> To: ccielab@groupstudy.com>
Subject: Difficult level between IE Mock lab vs Real Lab> > Hi,> Does anyone
have an idea about the difficulty level of IE MockLABs(lab> 1,2,3,4) versus
real CCIE LAB.> > BR,
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:00 ARST