From: shiran guez (shiranp3@gmail.com)
Date: Mon Jan 21 2008 - 13:14:30 ARST
no difference you just need to see that if you set percentage it is
recommended to set the Interface speed and duplex statically.
On Jan 21, 2008 5:47 PM, Mick Vaites <mick@pobox.net.uk> wrote:
> Hi All,
>
> is there any difference between specifying the threshold as a percentage
> or in bps.
>
> stormcontrol {broadcast|multicast|unicast} level <percentage> ... etc
>
> or
>
> stormcontrol {broadcast|multicast|unicast} bps <absolute> ... etc
>
> I've noted working through the workbooks that whilst the threshold is
> quoted as an absolute the solution is more often than not quoted as a
> level/percentage ..?
>
> I accept that in the real world it probably makes more sense to use a
> percentage but I'm concerned to give proctor what he's looking for.
>
> Best regards and thanks to all as ever
>
> Mick
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Shiran Guez MCSE CCNP NCE1 http://cciep3.blogspot.com http://www.linkedin.com/in/cciep3
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:00 ARST