From: Nick Stobbart (nstobbar) (nstobbar@cisco.com)
Date: Sat Jan 19 2008 - 13:20:04 ARST
Hello all,
I am working through the IE Workbook Vol2 using Dynamips.
In lab 1 for RMON config (task 9.1) when configuring RMON I do:
Rack1R2(config)#rmon alarm 1 ifEntry.11.1 60 delta rising-threshold
15000 1 falling-threshold 5000 2
But when I verify the config the monitor MIB value changes from
ifEntry.11.1 to ifInUcastPkts.1
Rack1R2#show rmon alarms
Alarm 1 is active, owned by config
Monitors ifInUcastPkts.1 every 60 second(s) <----- Shown here
Taking delta samples, last value was 0
Rising threshold is 15000, assigned to event 1
Falling threshold is 5000, assigned to event 2
On startup enable rising or falling alarm
In the solution guide it shows the MIB as ifEntry.11.1 in the
verification.
Is this something I have done wrong? Something Dynamips changes? or is
this normal and the solution guide is incorrect?
Thanks
Nick
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:38:00 ARST