From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Mon Jan 14 2008 - 01:10:56 ARST
Rack4SW4#show sdm prefer
The current template is the vlan template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1K VLANs.
number of unicast mac addresses: 8K
number of igmp groups: 1K
number of qos aces: 1K
number of security aces: 1K
number of unicast routes: 0
number of multicast routes: 0
Rack4SW4#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Rack4SW4(config)#ip routing
^
% Invalid input detected at '^' marker.
Rack4SW4(config)#ip r?
radius rcmd reflexive-list rtcp
Rack4SW4(config)#
HTH,
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: +1-775-544-1653 (Outside the US and Canada)
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Navid Daghighi
> Sent: Friday, January 11, 2008 6:57 AM
> To: Cisco certification
> Subject: ip routing
>
> Hi,
>
> when I type "ip routing" on a 3550 switch, I get this :
>
> ccieL4sw1(config)#ip r?
> radius rcmd reflexive-list rtcp
>
> ccieL4sw1(config)#ip routing
> ^
> % Invalid input detected at '^' marker.
>
>
> Is there any condition to meet to enable ip routing on a 3550 ?
>
> thanks,
> Navid
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:59 ARST