From: Gupta, Gopal (NWCC) (gopal.gupta@hp.com)
Date: Sat Jan 12 2008 - 05:20:03 ARST
Hi Experts,
One Confusion in the Doc Cd, it is written that BPDU filtering is
disabled by default as far as 3560's are concerned, but when i see the
output of the sh span int f0/10 detail, it shows for every port even if
it is trunk :-
Port 712 (Port-channel13) of VLAN0001 is forwarding
Port path cost 12, Port priority 128, Port Identifier 128.712.
Designated root has priority 32769, address 000b.46e5.1380
Designated bridge has priority 32769, address 000b.46e5.1380
Designated port id is 128.65, designated path cost 0
Timers: message age 1, forward delay 0, hold 0
Number of transitions to forwarding state: 1
Link type is point-to-point by default
Bpdu filter is enabled
internally<--------------------------------------------------Enabled
internally ??????
BPDU: sent 5, received 474
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:59 ARST