RE: TCL Script on 3500 switches

From: Scott Vermillion (scott_ccie_list@it-ag.com)
Date: Fri Jan 11 2008 - 14:19:44 ARST

• Next message: Darren Johnson: "RE: Mutual Redistribution"
• Previous message: Alex Burba: "Re: SWAP: Brussel, 21 Feb"
• Maybe in reply to: Gupta, Gopal (NWCC): "TCL Script on 3500 switches"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Gops,

Just refer to it directly:

SW2(config)#int range macro RANGE
SW2(config-if-range)#

Regards,

Scott

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Gupta, Gopal (NWCC)
Sent: Thursday, January 10, 2008 2:05 AM
To: Erik Nixon; Cisco certification
Subject: RE: TCL Script on 3500 switches

Just one more query

when we issue "Define interface-range" command, how to invoke this
Macro???
"macro global aaply" doesn't take this command.

SW2(config)#define interface-range RANGE f0/11 - 12
SW2(config)#macro glo
SW2(config)#macro global app
SW2(config)#macro global apply RANGE
% Macro 'RANGE' does not exist.
SW2(config)#

 Thanks,
Gops
________________________________

From: Erik Nixon [mailto:sneaky_nx@hotmail.com]
Sent: Thursday, January 10, 2008 07:55
To: Gupta, Gopal (NWCC); Cisco certification
Subject: RE: TCL Script on 3500 switches

You can use a macro with switches. I supplied a sample of one below:

(config) macro name test
do ping 144.1.17.1
do ping 144.1.15.1
do ping 150.1.1.1
do ping 144.1.27.2
do ping 144.1.24.2
do ping 150.1.2.2
do ping 144.1.34.3
do ping 204.12.1.3
do ping 150.1.3.3
do ping 144.1.46.4
do ping 144.1.34.4
do ping 144.1.24.4
do ping 150.1.4.4
do ping 144.1.5.5
do ping 144.1.15.5
do ping 150.1.5.5
do ping 144.1.46.6
do ping 54.1.10.6
do ping 150.1.6.6
do ping 144.1.17.7
do ping 144.1.27.7
do ping 144.1.78.7
do ping 150.1.7.7
do ping 192.10.1.8
do ping 144.1.78.8
do ping 150.1.8.8
do ping 144.1.5.10
do ping 150.1.10.10
@
(Config)macro global apply test (starts pinging after you enter this
command

Thanks

> Subject: TCL Script on 3500 switches
> Date: Wed, 9 Jan 2008 20:28:53 +0530
> From: gopal.gupta@hp.com
> To: ccielab@groupstudy.com
>
> Hi Experts,
>
> Is there any way we can run TCLSH on Switches for checking reachabiliy
> or we have to ping each n every address manually on the switches??
>
> Thanks
> Gops
>
>

• Next message: Darren Johnson: "RE: Mutual Redistribution"
• Previous message: Alex Burba: "Re: SWAP: Brussel, 21 Feb"
• Maybe in reply to: Gupta, Gopal (NWCC): "TCL Script on 3500 switches"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:59 ARST