From: subodh.rawat@wipro.com
Date: Fri Jan 11 2008 - 10:13:47 ARST
Guys to save time in LAB,,,,,
Just shutdown int put fr encap and ip and reload router.
-----Original Message-----
From: Monica Belluci [mailto:mpls1979@gmail.com]
Sent: Friday, January 11, 2008 5:03 PM
To: Alexandre Ribeiro
Cc: Felix Nkansah; Subodh Singh Rawat (WT01 - TELECOM SERVICE PROVIDER);
gopal.gupta@hp.com; ccielab@groupstudy.com
Subject: Re: FRAME-RELAY MAP
guys,
just changing encp will not solve the problem Even Clear frame-relay
inarp ,default int s1/0 will not remove 0.0.0.0 entries
Better way to remove 0.0.0.0 mapping do
no frame-relay inverse-arp save configuration RELOAD it
thanks
Nalini Roy
On 1/11/08, Alexandre Ribeiro <alexandregomesribeiro@gmail.com> wrote:
> Hello all,
>
> Even with "no frame inverse" 0.0.0.0 mappings may appear. A 0.0.0.0
> mapping means that there was an error in the inverse arp process. In
> order to avoid it you have to configure an FR interface in the correct
order:
>
> - Shut the interface
> - do a "no enc frame" or a "enc hdlc" to reset the frame relay process
> - do "enc frame"
> - do "no frame inverse"
> - do everything else
> - do a "no shut" on the interface
>
> The above order of operations will insure that you won't run into
"0.0.0.0"
> mapping issues.
>
> Alex
>
> On Jan 10, 2008 8:48 AM, Felix Nkansah <felixnkansah@gmail.com> wrote:
>
> > HI,
> >
> > The 'no arp frame' command is not necessary.
> >
> > It only makes your configs longer. Maybe it was useful in some
> pre-10.xIOS.
> >
> > The 'no frame inverse-arp' command is enough to stop dynamic
> > inverse-arping and the '0.0.0.0' from appearing.
> >
> > My 2 pesewas.
> >
> > Regards,
> >
> > Felix
> >
> > ____________________________________________________________________
> > ___ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
www.wipro.com
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:59 ARST