From: Gupta, Gopal (NWCC) (gopal.gupta@hp.com)
Date: Fri Jan 11 2008 - 07:02:57 ARST
Hi Experts,
Is it possible using switch port-security to limit the user to connect
only phone to some port and not any PC on that port ???
If yes ,please let me know how ???
I tried to do as following:
interface FastEthernet0/18
switchport mode access
switchport voice vlan 51
switchport port-security
switchport port-security violation shutdown
switchport port-security maximum 1 vlan voice
spanning-tree portfast
end
but it is still learning the Mac address on this port from Vlan 1
(Default Vlan for access port)
SW4#sh port-security int f0/18
Port Security : Enabled
Port Status : Secure-up
Violation Mode : Shutdown
Aging Time : 0 mins
Aging Type : Absolute
SecureStatic Address Aging : Disabled
Maximum MAC Addresses : 1
Total MAC Addresses : 1
Configured MAC Addresses : 0
Sticky MAC Addresses : 1
Last Source Address:Vlan : 0019.2f90.860d:1
Security Violation Count : 0
S
I just wanted this port to learn Mac addresses for only voice phone and
not Data.
Is this possible to only secure mac for voice phone??
Thanks,
Gops
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:58 ARST