From: Farhan Anwar (farhan.anwar@gmail.com)
Date: Thu Jan 10 2008 - 06:19:26 ARST
From the Lab's perspective, to save time. Configure FR Tasks first and
reload the FR enabled routers and goto switching tasks while the routers are
reloading. When finished with switching just verify FR connectivity.
HTH,
On Jan 10, 2008 1:30 AM, <subodh.rawat@wipro.com> wrote:
> U need to get rid of this asap if u wanna see ur no.
>
> Try to reload router after configuring FR.
>
> These r created automatically if your interfaces are encapsulated with
> Frame relay and no shutdowned.
>
> These r trying to take you to default route kinda thing.....not good for
> us.
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Gupta, Gopal (NWCC)
> Sent: Wednesday, January 09, 2008 8:23 PM
> To: Monica Belluci; Cisco certification
> Subject: RE: FRAME-RELAY MAP
>
> Does anybody have an idea what kind of entries are these??
>
> Thanks
> Gops
>
> ________________________________
>
> From: Monica Belluci [mailto:mpls1979@gmail.com]
> Sent: Wednesday, January 09, 2008 19:04
> To: Gupta, Gopal (NWCC); Cisco certification
> Subject: Re: FRAME-RELAY MAP
>
>
> Hi Jopal,
>
> shut the interface ->encapsulation Frame-relay > no frame inverse + no
> arp frame you will not find 0.0.0.0 entry.
>
> Nalini Roy
>
>
> On Jan 8, 2008 2:50 PM, Manu Ohri (mohri) <mohri@cisco.com> wrote:
>
>
> Hi ,
> Shut the interface before applying the frame-relay encaps.
> That will help.
>
> Regards,
>
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of
> Gupta, Gopal (NWCC)
> Sent: Monday, January 07, 2008 11:37 PM
> To: ccielab@groupstudy.com
> Subject: FRAME-RELAY MAP
>
> Hi Group,
>
> Why do we have frame-relay map statements 0.0.0.0
> <http://0.0.0.0/> when we turn on the
> interface for Frame-Relay it is ermoved only after reload of the
> Router.
> Even when i change the Encapsulation to PPP other than
> frame-relay and
> get back to Frame-relay again, still it shows 0.0.0.0
> <http://0.0.0.0/> Statements.
> What are these statements and why are they occured or what is
> the use of
> them??
>
> Thanks
> Gops
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> The information contained in this electronic message and any attachments
> to this message are intended for the exclusive use of the addressee(s) and
> may contain proprietary, confidential or privileged information. If you are
> not the intended recipient, you should not disseminate, distribute or copy
> this e-mail. Please notify the sender immediately and destroy all copies of
> this message and any attachments.
>
> WARNING: Computer viruses can be transmitted via email. The recipient
> should check this email and any attachments for the presence of viruses. The
> company accepts no liability for any damage caused by any virus transmitted
> by this email.
>
> www.wipro.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Farhan Anwar www.farhananwar.com
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:58 ARST