From: Joseph Saad (joseph.samir.saad@gmail.com)
Date: Wed Jan 09 2008 - 16:37:03 ARST
Rack1R1#sh runn | s class-map|policy-map|inter.*S.*0/0
class-map match-all FRTS
match protocol icmp
policy-map FRAME
class FRTS
shape average 1000000
shape adaptive 1000000
shape max-buffers 999
interface Serial0/0
ip address 1.2.3.4
encapsulation frame-relay
frame-relay lmi-type cisco
service-policy output FRAME
Rack1R1(config-if)#frame-relay traffic-shaping
Generic traffic shaping commands must be removed before enabling frame-relay
traffic shaping.
Rack1R1#sh policy-map int s0/0
Serial0/0
Service-policy output: FRAME
Class-map: FRTS (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: protocol icmp
Traffic Shaping
Target/Average Byte Sustain Excess Interval Increment
Rate Limit bits/int bits/int (ms) (bytes)
1000000/1000000 6250 25000 25000 25 3125
Adapt Queue Packets Bytes Packets Bytes Shaping
Active Depth Delayed Delayed Active
- 0 0 0 0 0 no
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Rack1R1#sh frame pvc 102
PVC Statistics for interface Serial0/0 (Frame Relay DTE)
DLCI = 102, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE = Serial0/0
input pkts 0 output pkts 0 in bytes 0
out bytes 0 dropped pkts 0 in pkts dropped
0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 00:26:35, last time pvc status changed 00:26:35
HTH,
Joseph.
On Jan 9, 2008 8:10 PM, nhatphuc <nhatphuc@gmail.com> wrote:
> you can use the following command to verify:
>
> show frame-relay pvc <dlci>
>
> On Jan 9, 2008 5:18 PM, Arun Kumar Arumuganainar <aarumuga@hotmail.com>
> wrote:
>
> > Hi ,
> >
> > I have a basic question?
> >
> > How can we verify MQC-Based Frame Relay Traffic Shaping ?
> >
> > I would appreciate Any links that talks about this.
> >
> > Pls. Note : I have referred this to documentation CD . But they talk
> only
> > about configuring MQC based traffic shaping. None of the links that I am
> > aware
> > of talks about the verification.
> >
> > Thanks and Regards
> > Arun
> > _________________________________________________________________
> > Post ads for free - to sell, rent or even buy.www.yello.in
> > http://ss1.richmedia.in/recurl.asp?pid=186
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:58 ARST