From: Ben Holko (ben@holnet.net)
Date: Wed Jan 09 2008 - 08:24:52 ARST
Does it matter? Is e0/0 being shutdown a requirement of the lab?
Remember, they're looking for connectivity, not connectivity under real
world scenarios or best practice.
Just do what the tasks ask of you, and achieve the goals stated.
If we shutdown S0/0 on various routers I'll bet it will break all sorts
of things, but if it's not a requirement to keep full connectivity with
this interface shut, then I must ask why you are shutting it in the
first place?
Ben
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Navid Daghighi
Sent: Wednesday, 9 January 2008 7:04 AM
To: Cisco certification
Subject: IE R&S lab 3... try this out !
Hi,
if one of you has recently done lab 3 of IE....
try this : AFTER task 4.9, shut down interface e0/0 on R4 (vlan 4)
you will see that a route to vlan 4 loops between R1, R2, R3 and R5,
never reaching vlan 4 of course
=> is this normal ?
if not, how can we avoid this ?
thanks,
Navid
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:58 ARST