From: Luan Nguyen (luan.m.nguyen@gmail.com)
Date: Tue Jan 08 2008 - 00:36:49 ARST
So you have shortcuts that will open up console port for each devices?
You don't have to do that control+shift+6+x to move around? And this is
true at all sites?
thanks.
-lmn
On Jan 4, 2008 6:43 PM, Ronnie Angello <ronnie.angello@gmail.com> wrote:
> Save your configs before the section. If you lock yourself out just tell
> the proctor what happened and that you would like to reboot the router.
> No
> passwd recovery needed unless you wr your configs.
>
> You will have shortcuts on your desktop for each device so you don't need
> to
> worry about that. Good luck!
>
>
>
>
> On Jan 4, 2008 2:42 PM, George Goglidze <goglidze@gmail.com> wrote:
>
> > Hello all,
> >
> > I've left less then one month till my first attempt,
> > and am worried about some problems I can have on the exam.
> >
> > I'm going to Brussels by the way, exam is on 31st of this month.
> >
> >
> > The question I have now is:
> > If I let's say have to configure dot1x, and I configure aaa new-model
> for
> > that.
> > and by accident I close the window, let's say before I configure no
> > authentication for my console line.
> > and I can't get back in the router.
> > Can I do the recovery procedure?
> >
> > and second question is, I hope the answer is not breaking the NDA,
> > if I have access to routers through console port. or there is basic
> > connectivity and I have to telnet?
> > basically do I use reverse-telnet to console, or is it normal telnet?
> >
> > Many thanks for answers,
> >
> > Regards,
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> --
> Ronald Angello
> CCIE #17846
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:58 ARST