From: Banks, Ethan (Ethan.Banks@ChasePaymentech.com)
Date: Mon Jan 07 2008 - 10:56:56 ARST
Check the SDM template applied to the switch. If I understand the
documentation correctly, you need "sdm prefer dual-ipv4-and-ipv6
routing" for IPv4 PBR support.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12240se/scg1
/swsdm.htm
"This software release does not support Policy-Based Routing (PBR) when
forwarding IPv6 traffic. The software supports IPv4 PBR only when the
dual-ipv4-and-ipv6 routing template is configured...
Desktop dual IPv4 and IPv6 routing template-supports Layer 2, multicast,
routing (including policy-based routing), QoS, and ACLs for IPv4; and
Layer 2, routing, and ACLs for IPv6 on desktop switches (all Catalyst
3750 switches except Catalyst 3750-12S)."
/Ethan - CCIE Candidate Blog
http://www.ethanbanks.net
|-----Original Message-----
|From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
|Behalf Of Muhammad Saleem
|Sent: Sunday, January 06, 2008 2:53 PM
|To: ccielab@groupstudy.com
|Subject: problem in PBR on CAT3750
|
|Hi Experts,
|
|I am trying to use PBR on CAT3750 with
|c3750-advipservicesk9-mz.122-40.SE
|image, I want to implement PBR on one of the VLANs, config is
|as following
|
|
|
|sdm prefer routing
|
|reload
|
|
|
|route-map INTERNET_TRAFFIC permit 5
|
|set ip default next-hop 192.168.43.22
|
|
|
|interface Vlan102
|
|ip address 192.168.32.1 255.255.255.0
|
|ip policy route-map INTERNET_TRAFFIC
|
|
|
|Immediately after writing "ip policy route-map
|INTERNET_TRAFFIC" command
|getting following error
|
|
|
|00:11:02: %PLATFORM_PBR-3-UNSUPPORTED_RMAP: Route-map
|INTERNET_TRAFFIC not
|supported for Policy-Based Routing
|
|
|
|According to the following link
|
|http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/softw
|are/release/1
|2.1_14_ea1/system/message/msg_desc.html
|
|---------------------------------------------------------------
|-------------
|----------------------------
|
|Error Message PLATFORM_PBR-3-UNSUPPORTED_RMAP: Route-map [chars] not
|supported for
|Policy-Based Routing
|
|Explanation This message means that the route-map attached to an
|interface for policy routing contains an action that is not
|supported on
|this platform. This is a hardware limitation. [chars] is the
|route-map.
|
|Recommended Action Reconfigure the route-map to use permit
|entries and
|set ip next-hop actions only.
|
|---------------------------------------------------------------
|-------------
|--------------------------------
|
|
|
|In my Cat3750 switch I have some static routes which I want
|from switch to
|check before forwarding traffic to 192.168.43.22, that's why I
|want to use
|set ip default next-hop command instead of set ip next-hop command.
|
|
|
|I will appreciate all responses
----------
Learn more about Chase Paymentech Solutions,LLC payment processing services at www.chasepaymentech.com.
THIS MESSAGE IS CONFIDENTIAL. This e-mail message and any attachments are proprietary and confidential information intended only for the use of the recipient(s) named above. If you are not the intended recipient, you may not print, distribute, or copy this message or any attachments. If you have received this communication in error, please notify the sender by return e-mail and delete this message and any attachments from your computer.
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:58 ARST