From: dsbabbar@gmail.com
Date: Sun Jan 06 2008 - 17:32:23 ARST
Hi Wael,
If I am not mistaken you are from Egypt and we have a common acquaintance Mohammad Al Attar.
I hope you are going for R&S track. If yes (as I have information only about R&S), then I think 5 months is just enough for Lab Preparation with the following conditions :-
1) You have already worked on most of the technologies in R&S.
2) You have good theoretically knowledge.
3) You can spend at least 4 hrs a day on an average for studying.
Dynamips is an excellent tool but it won't be good enough for covering all the topics. You can do almost 75% of Switching on dynamips (as dynamips can not simulate switches, but it supports 16 port Etherswitch module) and 100% of routing. For doing full scale labs on dynamips you would need lot of RAM and processing power. Dual Core, Dual process with 3-4 GB RAM would be good enough or you can use 2 separate machines and run half of your router on one and half on other machine.
If need more information do let me know.
Regards
Deepinder Singh Babbar
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:58 ARST