From: Jonny English (redkidneybeans@gmail.com)
Date: Sat Jan 05 2008 - 00:38:22 ARST
reload in 10, before you make any authentication changes. Remember to save
your config before making any authentication changes and if you lock
yourself out the router will reload in 10.
If everything works then remember to stop the router from reloading :).
On Jan 5, 2008 8:42 AM, George Goglidze <goglidze@gmail.com> wrote:
> Hello all,
>
> I've left less then one month till my first attempt,
> and am worried about some problems I can have on the exam.
>
> I'm going to Brussels by the way, exam is on 31st of this month.
>
>
> The question I have now is:
> If I let's say have to configure dot1x, and I configure aaa new-model for
> that.
> and by accident I close the window, let's say before I configure no
> authentication for my console line.
> and I can't get back in the router.
> Can I do the recovery procedure?
>
> and second question is, I hope the answer is not breaking the NDA,
> if I have access to routers through console port. or there is basic
> connectivity and I have to telnet?
> basically do I use reverse-telnet to console, or is it normal telnet?
>
> Many thanks for answers,
>
> Regards,
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Thank You,
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:57 ARST