From: Ronnie Angello (ronnie.angello@gmail.com)
Date: Fri Jan 04 2008 - 21:43:10 ARST
Save your configs before the section. If you lock yourself out just tell
the proctor what happened and that you would like to reboot the router. No
passwd recovery needed unless you wr your configs.
You will have shortcuts on your desktop for each device so you don't need to
worry about that. Good luck!
On Jan 4, 2008 2:42 PM, George Goglidze <goglidze@gmail.com> wrote:
> Hello all,
>
> I've left less then one month till my first attempt,
> and am worried about some problems I can have on the exam.
>
> I'm going to Brussels by the way, exam is on 31st of this month.
>
>
> The question I have now is:
> If I let's say have to configure dot1x, and I configure aaa new-model for
> that.
> and by accident I close the window, let's say before I configure no
> authentication for my console line.
> and I can't get back in the router.
> Can I do the recovery procedure?
>
> and second question is, I hope the answer is not breaking the NDA,
> if I have access to routers through console port. or there is basic
> connectivity and I have to telnet?
> basically do I use reverse-telnet to console, or is it normal telnet?
>
> Many thanks for answers,
>
> Regards,
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Ronald Angello CCIE #17846
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:57 ARST