From: Farrukh Haroon (farrukhharoon@gmail.com)
Date: Fri Jan 04 2008 - 17:20:00 ARST
Emil, look at the document I referred to you. The difference is mentioned
there.
On Jan 4, 2008 9:29 PM, YourPal <dearprudence28@gmail.com> wrote:
> Hi Brian,
>
> In my case he can do "sh run" but sees a blank config because there are no
> config commands available at privilege level 7 or below.
>
> I'm a bit confused with privilege levels 0 and 1. Aren't both referring to
> Router> prompt?
>
>
> Thank you.
>
> BR,
> Emil
>
>
> On 1/5/08, Brian Dennis <bdennis@internetworkexpert.com> wrote:
> >
> > The user is seeing all level 7 configuration commands ;-)
> >
> > Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
> > bdennis@internetworkexpert.com
> >
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com
> > Toll Free: 877-224-8987
> > Direct: 775-745-6404 (Outside the US and Canada)
> >
> >
> > >----- Original Message -----
> > Subject: Basic privilege issue
> > Date: Fri, January 4, 2008 7:43
> > From: "YourPal" <dearprudence28@gmail.com>
> >
> > > Hi Group,
> > >
> > > I have a basic problem but can't seem to figure out why. Hope someone
> > > can explain it to me. Router config as follows:
> > > !
> > > username test privilege 7 password 0 test
> > > !
> > > privilege exec level 7 show running-config
> > > !
> > > line vty 0 4
> > > login local
> > > !
> > >
> > > When user "test" telnets in and issues the command "sh run", he sees a
> > blank
> > > config. Why is it so? I'd like him to be able to view the config.
> > >
> > >
> > > Thank you.
> > >
> > > BR,
> > > Emil
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:57 ARST