From: Joseph Brunner (joe@affirmedsystems.com)
Date: Fri Jan 04 2008 - 02:45:28 ARST
WOW, that a CCNA look at the issue ;)
Perhaps the remote router
1. blocks ping with an acl
2. doesn't have a route back to the source, the ping your doing just uses
the outgoing interface
3. the next hop to 155.1.12.1 may not have the route 155.1.4.4 in its
ROUTING table? (are your running bgp over a non bgp router, do you have a
sync issue?) Could the next hop
I could name ten more, keep looking...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
uyota oyearone
Sent: Thursday, January 03, 2008 11:34 PM
To: CCIE
Subject: ios bug OR am i missing something????
Hi Group,
I have a scenario here, an having problems ping a remote site, although it
shows on the
Routing table, I still cant ping. could this possibly be an ios bug ? i
tried
debug to no avail
R2#sh ip route
B 155.1.4.0 [200/0] via 155.1.12.1, 00:03:37
R2#sh ip bgp
Network Next Hop Metric LocPrf Weight Path
*>i155.1.4.0/24 155.1.12.1 0 100 0 3 i
R2#ping 155.1.4.4
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to timeout is 2 se...
.....
Success rate is 0 percent (0/5)
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:57 ARST