From: Roger Roa (rroa) (rroa@cisco.com)
Date: Fri Jan 04 2008 - 00:25:06 ARST
Team
Configuring some switches I see some changes at MD5 DIGEST
sh vtp status showed:
MD5 digest : 0xDC 0x17 0xB1 0xF5 0xA3 0xB9 0x91
0x07
after creating some vlans and executing sh vtp status again, it showed:
MD5 digest : 0x0D 0xA4 0xD4 0x39 0x48 0x57 0x4F
0x03
Why it changed?
Thanks,
ROGER
FULL DETAILS
SW3(config)#do sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 5
VTP Operating Mode : Server
VTP Domain Name : CISCO-B
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0xDC 0x17 0xB1 0xF5 0xA3 0xB9 0x91
0x07
Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
Local updater ID is 0.0.0.0 (no valid interface found)
and then
SW3(config)#do sh vtp status
VTP Version : 2
Configuration Revision : 8
Maximum VLANs supported locally : 1005
Number of existing VLANs : 13
VTP Operating Mode : Server
VTP Domain Name : CISCO-B
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x0D 0xA4 0xD4 0x39 0x48 0x57 0x4F
0x03
Configuration last modified by 0.0.0.0 at 3-1-93 00:13:57
Local updater ID is 0.0.0.0 (no valid interface found)
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:57 ARST