From: Narbik Kocharians (narbikk@gmail.com)
Date: Thu Jan 03 2008 - 23:21:56 ARST
Look at the last lab in your OSPF section. From the work book in the class
room.
On 1/3/08, Chris Riling <criling@gmail.com> wrote:
>
> Hi Group,
>
> Does anyone have a good explanation for "area nssa translate"? Frome
> the DocCD:
>
> area nssa translate
>
> To configure an area as a not-so-stubby area (NSSA) and configure the Open
> Shortest Path First (OSPF) Forwarding Address Suppression in Translated
> Type-5 LSAs feature, use the *area nssa translate *command in router
> configuration mode. To remove the NSSA distinction from the area, use the
> *
> no* form of this command.
>
> *area* *area-id* *nssa* *translate type7 suppress-fa *
>
> no *area* *area-id* *nssa* *translate type7 suppress-fa *
> Syntax Description
>
> *area-id*
>
> Identifier of the area for which authentication is to be enabled. The
> identifier can be specified as either a decimal value or an IP address.
>
> *translate*
>
> Translates one type of LSA to another type of LSA. This keyword takes
> effect
> only on an NSSA area border router (ABR) or NSSA Autonomous System
> Boundary
> Router (ASBR).
>
> *type7*
>
> Translates a Type-7 LSA to a Type-5 LSA. This keyword takes effect only on
> an NSSA ABR or an NSSA ASBR.
>
> *suppress-fa*
>
> Suppresses the forwarding address of the Type-7 LSAs from being placed in
> the Type-5 LSAs. This keyword takes effect only on an NSSA ABR or an NSSA
> ASBR.
>
> Doesn't an NSSA ABR do this by it's very nature? Also, could someone
> clarify
> when you might use forward address supression?
>
> Thanks,
> Chris
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Narbik Kocharians CCIE# 12410 (R&S, SP, Security) CCSI# 30832 www.MicronicsTraining.com Sr. Technical Instructor www.Net-WorkBooks.com
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:57 ARST