From: Jorge Martinez (jorge_bgp@yahoo.com)
Date: Wed Jan 02 2008 - 20:03:04 ARST
What is your
frame-relay pvc | incl DLCI
output?
--- nhatphuc <nhatphuc@gmail.com> wrote:
> I add command "frame-relay inverse-arp ip 301" on R3
> and it works.
>
> Phuc
>
> On Jan 2, 2008 12:02 PM, nhatphuc
> <nhatphuc@gmail.com> wrote:
>
> > I pinged many times
> >
> >
> > On Jan 2, 2008 11:43 AM, Kim teu
> <kim.teu@gmail.com> wrote:
> >
> > > try ping from both sides.
> > >
> > > Regards,
> > > Kim
> > >
> > >
> > > On 1/1/08, nhatphuc <nhatphuc@gmail.com> wrote:
> > >
> > > > Hi Group,
> > > >
> > > > I have 2 router connect via frame-relay:
> > > >
> > > > R1 s0.134 (multipoint)
> 103-----------FRS-----------301 R3 S0
> > > > (physical)
> > > >
> > > > R1
> > > >
> > > > interface Serial0
> > > > no ip address
> > > > encapsulation frame-relay
> > > > frame-relay lmi-type cisco
> > > > !
> > > > interface Serial0.134 multipoint
> > > > ip address 187.1.134.1 255.255.255.0
> > > > frame-relay map ip 187.1.134.3 103 broadcast
> > > >
> > > > R3
> > > > interface Serial0
> > > > ip address 187.1.134.3 255.255.255.0
> > > > encapsulation frame-relay
> > > > no frame-relay inverse-arp IP 302
> > > > no frame-relay inverse-arp IP 304
> > > > no frame-relay inverse-arp IP 305
> > > > frame-relay lmi-type cisco
> > > > end
> > > >
> > > > I've been waiting for long time, but R3 hasn't
> mapped to R1 using
> > > > inverse
> > > > ARP, how can I speed it up?
> > > >
> > > > Thank you
> > > >
> > > > Phuc
> > > >
> > > >
> > > >
>
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:57 ARST