From: Wilhelm Boeddinghaus (wilhelm@boeddinghaus.de)
Date: Wed Jan 02 2008 - 04:32:37 ARST
Hi Vinod,
I used the regular workbooks with Dynamips for preparation. The
workbooks prepare you very well for the exam.
I did not pass because I did not do all labs. I would have needed more
detailed knowledge on some questions. But this is not the fault
of the labs :-)
Some minor changes are needed for Dynamips when using the regular workbooks:
Most of the time you have to use "serial 1/0", and not "serial 0/0".
Exchange Ethernet and FastEthernet.
You do not have the 3550 and 3560 switches used in the real lab. So you
need some online rack time to get
used to this switches.
The 16 port switching modul used for switching in dynampis does not
support ISL or dot1q tunnels, some online rack time
is needed for this as well.
The cost is not to high if you see what you get after passing :-)
Greetings,
Wilhelm
Vinod Lodhi schrieb:
> Hi Folks,
>
> Y'day I passed the CCIE Qual with 94% and now moving on for the LAB. I'm
> using DynamipsGUI 2.82 for the preparation.
>
> I was thinking to use 'IEWB-RS-DYN-EL' for my LAB preparations, but didn't
> find any feedback. Could you pls. let me know if you are using the same and
> if you could share your experience good/bad. URL of the site is attached.
>
> http://www.internetworkexpert.com/iewb-rs-dyn.htm
>
> Price: $195 | Part 1 (Labs 1-10)
> Price: $195 | Part 2 (Labs 11-20) Release date: January 15, 2008
>
> Cost is also very high. Could you tell me if one set is sufficient 'LAB
> 1-10' etc.
>
> How can I get the discount vouchers to get some discount.
>
> I'm working with Cisco and will get the account for 'iementor' and the
> member of 'http://members.internetworkexpert.com/member/'. Can anyone help
> if I can get the discount voucher to buy these labs.
>
> Thanks in advance.
>
> Regards,
> vinod
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Feb 01 2008 - 10:37:57 ARST