From: Chris Riling (criling@gmail.com)
Date: Sun Dec 30 2007 - 18:50:56 ARST
Thanks for responding... R7 cannot ping the multicast group and get a
reply...the other boxes can, but for some reason it's not working across the
frame cloud.
Thanks,
Chris
On Dec 30, 2007 2:21 AM, Joseph Saad <joseph.samir.saad@gmail.com> wrote:
> Not sure if you got an answer, but maybe you need to raise the DR priorit
> of R8 interface to R8.
>
> I fail to understand what your issue is though.
>
> On Dec 29, 2007 12:07 PM, Chris Riling < criling@gmail.com> wrote:
>
> > Hi Guys,
> >
> > Suppose I have the following situation:
> >
> > SW4 ------- R8
> > /
> > Frame Cloud
> > |
> > R7
> >
> > SW4 has ip igmp join-group 239.1.2.3 for example
> > R8 is a multipoint frame hub
> > R7 is a frame spoke
> > R8 is the RP via BSR
> > All relevant interfaces have ip pim sparse-mode and all devices have no
> > ip
> > pim dm-fallback
> >
> > What would be required to make this work? I don't have access to my
> > configs
> > atm, but I enabled ip pim nmba-mode on the serial interfaces, and I
> > can't
> > get it working across the frame cloud. I do have the broadcast keyword
> > on
> > the PVC. R8 and SW4 can both ping the group and get a reply, and
> > everyone
> > (including R7) is showing the correct RP via BSR (R8's lo0). What else
> > is
> > needed to make this work over the cloud?
> >
> > Thanks,
> > Chris
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:32 ARST