From: Mark Snow (msnow@ipexpert.com)
Date: Sat Dec 29 2007 - 17:54:55 ART
Hi Peter,
1) We have had many students with non RFC-1918 private IP addresses
and it works just fine. EasyVPN supports NAT-T, so the real question
is if your ISP blocks certain ports such as ISAKMP (UDP 500) or not.
2) We don't currently offer L2TP support - such as what you are most
likely describing - so all of your phones at your site will be on one
subnet and NAT'd back to our network.
Shouldn't really affect anything much - just when you want to test QoS
across a given serial link - just do a 3-way conference.
Cheers,
Mark Snow
CCIE #14073 (Voice, Security)
CCSI #31583
Senior Technical Instructor - IPexpert, Inc.
A Cisco Learning Partner - We Accept Learning Credits!
Telephone: +1.810.326.1444
Fax: +1.309.413.4097
Mailto: msnow@ipexpert.com
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On
Demand and Audio Certification Training Tools for the Cisco CCIE R&S
Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and
CCIE Storage Lab Certifications.
On Dec 29, 2007, at 1:20 PM, ccie preparation wrote:
> Mark,
> Thanks for the response. I have few more questions, please
> assist:
>
> 1) For Ezvpn Option do we need to have a public address on the
> router. I have a broadband connection at Home and get a private
> address from my ISP.
>
> 2) Will these 4 phones be on different subnets? I know of a company
> that runs GRE over IPsec tunnel and students can put IP Phones in
> different Vlans as if they where on different sites(HQ,Site1,Site2).
> The company requires students to have a router and a switch at home.
> Does IPExpert do the same?
>
> Thanks,
> Peter
>
> On Dec 29, 2007 3:13 PM, Mark Snow <msnow@ipexpert.com> wrote:
> Hi Peter,
>
> The Berbee Remote Control software relies on you having a CTI user
> setup and Device Association setup to the phone(s) in question to be
> controlled.
> So you can use it if you own it (not freeware) and set it up on your
> own laptop.
>
> Also we a few nice video's on the site on how to setup multiple
> Microsoft Loopback Adapters and change their MAC Addresses - so that
> you have multiple MAC addy's with which to connect to your CallManger,
> CME, and/or PSTN phone if you choose.
>
> https://proctorlabs.com/downloads/media/PSTN-IPBlue-Demo.mp4
>
> Of course, if you like, you can use your own Router and 4 Cisco
> hardware IP Phones through our EasyVPN option (full instructions when
> you log in to your Proctorlabs.com account) - and then you wouldn't
> need this IP Blue option - which do shut off every 20 mins unless you
> buy a license from them which we recommend.
>
>
> Cheers,
>
> Mark Snow
> CCIE #14073 (Voice, Security)
> CCSI #31583
> Senior Technical Instructor - IPexpert, Inc.
> A Cisco Learning Partner - We Accept Learning Credits!
> Telephone: +1.810.326.1444
> Fax: +1.309.413.4097
> Mailto: msnow@ipexpert.com
>
> IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On
> Demand and Audio Certification Training Tools for the Cisco CCIE R&S
> Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and
> CCIE Storage Lab Certifications.
>
>
> On Dec 29, 2007, at 10:06 AM, Tarun Pahuja wrote:
>
> > Thanks brian, I did not have a loopback interface, now it is
> working.
> > One more question is do you know about berbee remote control
> > software, Can
> > we get a demo for it? how much does it cost? any recommendations?
> >
> > Cheers,
> > Peter
> >
> > On Dec 29, 2007 11:46 AM, Brian Dennis
> > < bdennis@internetworkexpert.com>
> > wrote:
> >
> >> Are you running it with the "/d" option ("C:\Program Files\IP
> >> blue\VTGO\VTGO-PC.exe" /d) and have you created the additional
> >> loopback
> >> interfaces (assuming you only have one real NIC)? Also be sure to
> >> change
> >> the MAC addresses of the loopbacks as they tend to share a single
> MAC
> >> address.
> >>
> >> Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
> >> bdennis@internetworkexpert.com
> >>
> >> Internetwork Expert, Inc.
> >> http://www.InternetworkExpert.com <http://
> >> www.internetworkexpert.com/ >
> >> Toll Free: 877-224-8987
> >> Direct: 775-745-6404 (Outside the US and Canada)
> >>
> >>
> >>> ----- Original Message -----
> >> Subject: IPExpert Voice Rack
> >> Date: Sat, December 29, 2007 8:12
> >> From: "ccie preparation" <ccie22@gmail.com>
> >>
> >>> I am using ipexpert voice lab and unable to use ipblue phone to
> >>> run in
> >>> multiple instances, what am i doing wrong? can i run multiple
> >>> instances
> >> of
> >>> ipblue on my laptop and register with different phone numbers?
> >>>
> >>> Can I use berbee software also to remote control the remote
> phones?
> >>>
> >>> Thanks,
> >>> Peter
> >>>
> >>>
> _______________________________________________________________________
> >>> Subscription information may be found at:
> >>> http://www.groupstudy.com/list/CCIELab.html
> >>
> >>
> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:32 ARST